A pair of lightweight edge mount brackets for mounting privacy screens/dividers on the desk top.
The edge mount brackets are compatible with privacy screens of thickness between 4-12mm with the included M6*15 socket grub bolt. For thicker screens up to 17mm, the optional M6*20 socket bolts is available on request.
The edge mount brackets are compatible with desktops of thickness 20-26mm, including the most popular 25mm MFC desktops commonly seen in modern offices.
The slim edge mount brackets provide a non-invasive way to mount a privacy screen to the desktop so it can remain cosmetically perfect for possible re-use. It is very easy to use in 3 simple steps:
- Slide the brackets over the edge of the desktop;
- Tighten the 3 bolts (for each bracket) from underneath;
- Insert the privacy screen in the brackets and tighten the bolts.
What is the difference between SEM01 SEM02 SEM03 desk privacy screen brackets?
SEM01 is a flat bottom bracket which must be screwed down to the desk.
Some customers don’t want their desktop damaged by screws, and SEM02 screen brackets address this problem by adding a slim desk clamp at the bottom.
Some customers want an even quicker way to install the privacy panels or have difficulties to clamp to the edges and SEM03 might be the solution. SEM03 screen brackets have a double sided clamp, making it possible to mount on one desk or between two desks via clamp, as well as the possibility to screw onto an optional acrylic panel (100×150 mm) to form a free-standing base, so the privacy screens will be free-standing and easy to remove which is relevant for temporary cough-guard or sneeze-guard panels.