Electric radial desk is the ideal choice for professionals working from home or office: the radial shape significantly increases the accessible workspace within your arms’ reach, while the electric height adjustment helps reduce your sitting hours and maintain a healthier working habit. With a simple touch the desk can be adjusted to any height between 63 to 125 cm. The dual motors run very fast (averaging 38 mm/s, twice as fast as competitors) and quiet (< 50 dB, lower than typical office noise level), and the steel frame is stable and sturdy.
The Allcam EDF12RDK is structurally more similar to the EDF12D dual-motor sit-stand desk frame, rather than the full-featured Allcam EDF13T triple-motor sit-stand desk frame. So it occupies less floor space, hence more suitable for people working from home.
The steel frame is telescopic, compatible with desk-tops sized between 1800×1200 mm and 1100×900 (Width x Depth, see radial-top diagram), in addition the W2 should be 800mm or less. If your top is bigger than 1800×1200 (Width x Depth), or if W2 is bigger than 800mm, It is better to buy the full-featured Allcam EDF13T radial desk frame.
Customise your own radial desk
You can recycle your old top to save money, or buy a new desk-top customised to your own requirement. Allcam radial tops are made in the UK, tailor-made to your own size/shape and a range of 8 colours: Beech, White, Oak, Walnut, Black, Light Grey, and Dark Grey. Please note because all optional radial tops are custom-made to order, there is a lead time of 2-3 weeks, and the order for tops can’t be cancelled once confirmed
How to measure the radial desk-top?
When you order a radial desk-top, you need to specify the dimensions of all 4 sides: D, W, D2, W2 (see the radial-top diagram above). You can also specify if any cable holes are required.
Works for both left-side and right-side corners
The Allcam EDF12+RDK radial standing desk frame is side-neutral, so you can use it in both left-hand and right-hand corners. Simply use the longer foot and longer desk-top bracket on the bigger side (D side vs D2 side, check the radial-top diagram above).
|for Left Corner||for Right Corner|
Modern touch-sensitive remote control
You can easily set height to any of the 3 memories. When the desk is at your desired height touch button “M” then “1” or “2” or “3” to set or re-set. You may like “1” to be your reading position, “2” to be your writing position, and “3” to be your standing position. When you want to change from reading position to standing position, simple touch “3”.
The sit-stand timer offers a quick way to set up sitting time reminder. Simply press button “T” for a count-down timer of 0.5 hr or its multiples (up to 4 times, i.e. 2hr).
Invest in your health with a sit-stand desk
Standing desks help reduce your sitting hours and maintain a healthy working habit. By switching to standing position regularly, you will be focusing on your work more, alleviating lower back pain, and potentially extending your life expectancy. Scientists estimate that reducing your sitting time to less than 3 hours a day could increase your life expectancy by 2 years. Several studies also show lower back pain is becoming a common problem for people sitting over 4 hours per day. It is highly recommended you take a break or switch to standing after sitting for 2 hours or more.