Featuring 2 electric motors that allow you to adjust the height of your desk, the Allcam EDF32D electric sit stand desks help reduce your sitting hours without sacrificing working hours, as well as extending your precious life and alleviating your lower back pain. It is quick and easy to adjust the electric desk and it can be raised from 58cm to 123cm within seconds. This allows you to work comfortably, whether sitting down or standing up.
Clean Finish (hidden screws)
Stay healthy and stay clean go together. Based on your feedback of our popular EDF10-series standing desks, all screws are now hidden from sight.
Dual-sensor Anti-collision sensitivity
There are two sensors: one for electric current and one gyro for levelness, and there are 3 sensitivity parameters (upward, downward, and levelness /gyro), each with 9 level settings. Effectively you can have 27 different anti-collision sensitivity settings.
Freedom to customize your own standing desk
The EDF32D sit-stand desk frame is telescopic so you can use any compatible top of your choice. You may recycle the top of your old desk to save some money, or you can choose any top of Width: 1100 – 2200mm / 43.3″-86.6″ and Depth: 600-800mm / 23.6″-31.5″. We recommend the Allcam range of solid MFC tops (which are made in the UK). Please note some cheap worktops like IKE* Linnmo* are hollow in the middle hence not compatible with most electric standing desks.
Three height presets
When the desk reaches your desired height, touch button “M” then “1” or “2” or “3” to set, for example, “1” for your reading position, “2” for writing position, and “3” for your standing position. When you want to change from reading position to standing, simply touch “3”.
Simply press button “A” for a count-down timer of 45min (you may also use UP and DOWN button to increase/reduce), and when the time is over it will alert you to change position.
The Allcam EDF32DW EDF32DB dual-motor sit-stand desk frames are brand new and come with a 5 year warranty (including the electric motor).
Height Adjustable Range: 580-1230 mm / 22.8″-48.4″ (+25mm/ 1″ for desk-top)
Telescopic Frame: 1100-1900 mm / 43.3″-74.8″
Compatible Desk-top – Width: 1100 – 2200mm / 43.3″-86.6″; – Depth: 600-800mm / 23.6″-31.5″
Max Lift Capacity: 125 KG / 275 lbs
Max Speed: 38 mm/s
Anti-collision: dual sensors Gyroscope and electric current ammeter
Operating Noise:< 50 dB (lower than typical office noise level)
The EDF32D series electric height adjustable standing desk frames are supplied in one flat packed carton. It is designed with easy assembly in mind, anyone with a little bit of DIY experience should be able to complete the installation in 15-20 min. Here is a quick video guide:
There are no reviews yet.