Shows some signs of light use and box may miss some non-critical parts like cable clips, soft pads, or screws/washers, otherwise tested in full working condition.
The Allcam EDF02D electric desk helps reduce your sitting hours and maintain a healthier working habit. With a simple touch the desk can be adjusted to any height between 63 to 125 cm. The dual motors runs very fast (averaging 38 mm/s) and quite (< 50 dB), and the steel frame is stable and sturdy.
Scientists estimate that by reducing your sitting time to less than 3 hours a day could increase your life expectancy by 2 years. It is highly recommended you take a break or switch to standing position after sitting for 2 hours or more. Several studies also show lower back pain is becoming a common problem for people sitting over 4 hours per day. By switching to standing positing regularly, you will be focusing on your work more, extending your life expectancy, and alleviating lower back pain.
Advanced controller with 3 memory presets and sit-stand timer
You can easily set height to any of the 3 memory. When the desk is at your desired height. Touch button “M” then “1” or “2” or “3” to set or re-set. You may like “1” to be your reading position, “2” to be your writing position, and “3” to be your standing position. When you want to change from reading position to standing position, simple touch “3”.
The sit-stand timer offers a quick way to set up sitting time reminder. Simply press button “T” for a count-down timer of 0.5 hr or its multiples (up to 4 times, i.e. 2hr).
3-Stage reversed lifting columns
The reversed design of the lifting columns (legs) might looks strange at the first glance, normally people want the bulkier section at the bottom. This is NOT a mistake. Our engineers have tested in the lab again and again to conclude the reversed design is indeed more stable for the 3-stage dual-motor desks. Interestingly, they also concluded that the normal design is more stable for 2-stage single-motor desks.
Telescopic frame & Customise your own desktop
The steel frame is telescopic width wise, allowing most common worktop to be mounted on top, as long as the width is within 110 -220 cm and the depth is within 70 – 100 cm. You can customise your own desktop to suit your own taste.